Smart hardware,
hand-picked for carwashes.
Sensors, switches, and gateways chosen for wash sites. A growing set integrates with WashConsole today — the rest work standalone now, with integration on the roadmap.
Free US shipping over $50 · Ships to US addresses only · Arrives in 2–5 business days · Secure Stripe checkout
Starter kits
Curated bundles that map to a real install. Kit pricing lands as a bundle discount at checkout — buying multiple kits multiplies the savings.
Equipment Room Starter
Your back-of-house, online in one night.
Floor-leak coverage on the equipment-room floor plus temperature & humidity for the chemical room — paired to a single BLU Gateway.
- Shelly BLU Gateway×1
- Shelly Flood Gen4×2
- Shelly H&T Gen3×1
Leak Defense Kit
Cover the spots water actually shows up.
Flood sensor with the cable extension and brackets so the probe lands exactly where it needs to be — sumps, drip pans, behind softener tanks.
- Shelly BLU Gateway×1
- Shelly Flood Gen4×1
- Shelly Leak Sensor Cable (2 m)×1
- Shelly Cable Bracket (10-pack)×1
All products
Every device is hand-picked by WashConsole to work for your carwash.
Shelly Flood Gen4
Catch leaks before they shut you down
- Detects standing water in <1 second
- 2-year battery life on built-in cells
- IP44 housing, with 3.5mm probe extension
Shelly H&T Gen3
Watch your tunnel temperature & humidity
- ±0.4°C accuracy, ±2% RH
- E-ink display readable in low light
- ~10 year battery on 1× CR123A
Shelly 1 Gen4
16 A smart relay for any equipment in your wash
- Switches any 16 A AC/DC load
- Wi-Fi + Matter + Zigbee + Bluetooth
- Built-in scheduling and automations
Shelly BLU Gateway
Required for every Shelly device. Plug in once per site.
- Bridges 20+ Shelly BLU sensors
- USB-A dongle, plug-and-play
- Pre-provisioned for WashConsole MQTT
Hydrific Droplet
Whole-site water usage + leak detection in one ultrasonic clamp
- Tracks gallons-per-cycle for the whole site
- AI leak detection (pinhole to burst)
- Clamp-on install in <10 minutes, no plumbing
Sold and shipped by Hydrific. WashConsole customers get an additional 10% off. We may earn a commission.
Shelly Cable Bracket (10-pack)
Keep your leak-sensor probe exactly where you put it
- 10 brackets per pack
- Adhesive foam backing for tool-free installs
- Screw holes for permanent mounting
Shelly Leak Sensor Cable (2 m)
Reach a leak the sensor can't sit on
- 2 m (~6.5 ft) probe extension
- 3.5 mm male & female connectors
- Works with Shelly Flood Gen4